Error Messages; Cleaning And Care; Important - SilverCrest SBB 850 EDS A1 Mode D'emploi

Error Messages

• If the display shows "HHH" after the programme
has been started, it indicates that the temperatu-
re in the Bread Baking Machine is still too high.
Stop the programme and remove the power plug.
Open the appliance lid
to cool down for 20 minutes before re-using it.
• If a new Programme cannot be started directly
after the Bread Baking Machine has completed
a baking process, it means the appliance is still
too hot. In this case the display panel reverts to
the default setting (Programme 1). Open the ap-
pliance lid and allow the machine to cool
down for 20 minutes before re-using it.
Warning!
Do not attempt to take the appliance into use before
it has cooled itself down. This functions only with
Programmme 12.
• If the display shows "EE0", "EE1" or "LLL" after
the programme has been started, first of all
switch the Bread Baking Machine off and then
back on by removing and then re-inserting the
power plug from/into the wall socket. Should the
error display continue, make contact with
Customer Services.

Cleaning and Care

Warning!
Before cleaning it, always remove the power plug
from the wall socket and allow the appliance to
cool down completely.
Protect the appliance against moisture, this could
cause you to receive an electric shock.
Please also observe the safety instructions.
and allow the machine

Important!

The appliance and its ancillaries are not suitable
for being cleaned in a dish washing machine!
Housing, lid, baking space
Remove all particles left behind inside the baking
area using a wet cloth or a slightly wet soft sponge.
Wipe the housing and the lid too, only with a moist
cloth or sponge.
• Ensure that the interior is completely dry. For
easier cleaning, the appliance lid
removed from the housing:
• Open the appliance lid
shaped hinge cams pass through the openings
of the hinge guides.
• Pull the appliance lid
• To reassemble the appliance lid
hinge cams through the opening of the hinge
guides.
Baking moulds and kneading paddles
The surfaces of the baking moulds ¶ and knea-
ding paddles ² have a non-stick coating. When
cleaning the appliance do not use aggressive
detergents, cleaning powders or objects that may
cause scratches to the surfaces.
Due to moisture and vapours the surfaces of
various parts may undergo changes in their appea-
rance over a period of time. This has no influence
on the function nor does it reduce the quality of the
baking results.
Before cleaning, take the baking moulds ¶ and
kneading paddles ² out of the baking area. Wipe
the outside of the baking moulds ¶ with a damp
cloth.
- 55 -
can be
until the wedge-
out of the hinge guides.
, guide the