Time Defrost Operation; Auto Menu Operation - Sharp R-28ST Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51

TIME DEFROST OPERATION

TIME DEFROST
This function quickly defrosts food while enabling you to choose a suitable defrost period, depending on the
food type. Follow the example below for details on how to operate this function. The time range is 0:05 – 95:00.
Example: To defrost the food for 10 minutes.
1. Press the TIME DEFROST
button.
x1
Notes for Time Defrost:
• The preset microwave power level can not be changed.
• Before freezing foods, ensure food is fresh and of good quality.
• If necessary, shield small areas of meat or poultry with flat pieces of aluminium foil. This will prevent the
areas from becoming warm during defrosting. Ensure the foil does not touch the oven walls.
• After defrosting the audible signal will sounds i ve times and the LED will then display time of day, if the
clock has been set. If the clock has not been set, the display will only show "0:00" when defrosting is
complete.

AUTO MENU OPERATION

The AUTO MENU programmes automatically work out the correct cooking mode and cooking time of the foods
(details on page GB-13). Follow the example below for details on how to operate this function.
Example: To cook i sh with a weight of 250 g by using the AUTO MENU function.
1. Press the
2. Rotate the ENTRY
AUTO MENU
dial to select the
button.
desired auto menu.
A-1 will be
displayed
NOTES:
• The weight or quantity (in ml for soup) of the food can be input by rotating the ENTRY dial until the desired
weight/quantity ('g' or 'ML' will light up) is displayed. Enter the weight of the food only. Do not include the
weight of the container.
• For food weighing more or less than the weights/quantities given in the AUTO MENU chart on page GB-13
cook by manual operation.
2. Enter the cooking time by
rotating the ENTRY dial until the
display shows 10:00
3. Press the
AUTO MENU
button to
coni rm the
setting.
GB-12
3. Press the START/+1min button to
start defrosting.
(The display will count down
through defrosting time)
4. Enter the desired
weight by rotating
the ENTRY dial.
5. Press the START/
+1min button to start
cooking.
(The display will count
down through the set
cooking time.)

Publicité

Table des Matières
loading

Table des Matières