Space Seating 13-37N9WA Instructions De Montage

13-37N9WA / 13-R37N9WA / 13-7N9WA / 13-77N9WA
ÉTAPE 1 ÉTAPE 2
12
2
X5
1
8
ÉTAPE 4 ÉTAPE 5
3
1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
ÉTAPE 2 Fixez les bras (7L et 7R) au coussin du siège (5) avec quatre vis du bras (8) pour chaque bras. SERREZ TOUTES LES VIS VEC LA
CLÉ ALLEN (12).
ÉTAPE 3 Fixez la mécanisme (4) au coussin du siège (5) avec la flèche qui se dirige vers l'avant de la chaise en utilisant quatre vis du mécanisme (9).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 4 Insérer le vérin pneumatique (3) dans la base (1). Placez le siège assemblé sur le vérin pneumatique (3) et mettez de la pression vers le bas.
ÉTAPE 5 Fixez le support du dossier (11) à l'arrière du mécanisme (4) avec deux vis du dossier (10). SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (12)
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
LA CHAISE DU DIRECTEUR
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
12
9
X4
8
X4
4
7L
5
7R
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
6
4. Mécanisme . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
6. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . . . . .2
11
8. Vis du bras . . . . . . . . . . . . . . . . . . . . . . . . . .8
9. Vis du mécanisme . . . . . . . . . . . . . . . . . . . .4
X2
12
10. Vis du dossier . . . . . . . . . . . . . . . . . . . . . .2
11. Support du dossier (pre-installed) . . . . . . .1
10
12. Allen Wrench . . . . . . . . . . . . . . . . . . . . . . .1
4
X4
5
5
3
2
1
QTÉ
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829's with self-
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
© Office Star Products janvier 2017
13-37N9WA / 13-R37N9WA / 13-7N9WA / 13-77N9WA
MANAGERS CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To lower
seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (5) in to allow the arms to move up or
4
down freely. Release the button (5) once the desired height is reached.
• ARM WIDTH ADJUSTMENT
To adjust width, push lever (3) down slide arm to
desired position then pull lever (3) up to lock arm
into position.
• MULTI FUNCTION CONTROL
To adjust seat tilt, lift lever (2). Leave lever up for free float or push lever
down to lock at any angle. To adjust Back angle lift lever (4). Leave lever
up for free float or push lever down to lock. To slide the Seat, pull lever (6)
up and release the lever (6) once the desired position is reached.
WARNING
6
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are securely
tightened.
3. Check that all bolts screws and knobs are tight every three months or as
needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.