8
HAND IMMERSION BLENDER
INSTRUCTIONS FOR USE
IMPORTANT: ALWAYS UNPLUG THE APPLIANCE FROM THE SOCKET BEFORE
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE
APPLIANCE.
- Fit the blending rod (A) to the power unit (E)
IMPORTANT:
Make sure the rod is correctly fitted before using the appliance.
- This hand blender can be used to prepare sauces, soups, mayonnaise, baby food,
cocktails and shakes.
It can be used in a container or directly submerged in the pan containing the mix
to be blended, which must be removed from heat to prevent the appliance from
overheating. Start and stop the appliance while the blade set is submerged in the
container with the food to avoid possible splashing. We also recommend using the
appliance in short bursts since this is the way to achieve the best possible result and
the only way to prevent the appliance motor from overheating.
IMPORTANT:
Only use the appliance for 30 seconds at a time when preparing recipes, then leave
it to cool to room temperature.
- Place the food for blending in a container and plug the appliance into the power
socket.
- The hand blender is provided with two speeds according to the type of food to be
blended; gently press the button (C) for the lower speed, or press the button (D) for
a higher speed.
- After use, wait for the blade set to stop moving completely and then unplug the
appliance from the power socket.
CLEANING
IMPORTANT: DO NOT IMMERSE THE CORD, THE PLUG, OR THE BODY OF
THE MACHINE IN WATER OR ANY OTHER LIQUIDS. CLEAN WITH A DAMP
CLOTH.
- Clean the power unit (E) with a soft damp cloth.
- To clean the blending rod (A), we recommend using hot water and if necessary, a
mild detergent.
IMPORTANT: After cleaning, make sure that there is no water inside the blending
rod (A) before fitting it to the power unit (E).