Technical Data - Westfalia 313 082 691 111 Instructions De Montage

Installation and Operating Instructions
Coupling Ball with Bracket (CBB)
Westfalia Order No.:
Type:
EC Auth. Des.:
Application:
EC Authorised Designation: 202, H 0, 208

Technical Data:

The tested D-value is 9,1 kN. This corresponds, for example, to a towed weight of 1700 kg and
a gross vehicle weight of 2050 kg. The tested trailer nose weight is 75 kg. For driving, the data
of the vehicle manufacturer with regard to the towed weight and trailer nose weight are decisive,
whereby the tested values of the CBB may not be exceeded.
Notes:
The CBB is a safety part and may only be mounted by specially trained personnel. Should spare
parts be required, these may also only be mounted on the undamaged original-equipment part
by specially trained personnel.
No changes or modifications to the CBB are permitted.
When driving with a trailer, observe the driving instructions in the vehicle manufacturer's
operating instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the CBB necessitates the removal of the towing eye, the CBB serves as a
replacement, provided the permissible towed weight is not exceeded and the towing takes place
on normal roads.
The ball and coupling must be kept clean and greased.
Important: When using track stabilising devices, e.g. the Westfalia "SSK", the coupling ball
must be grease-free.
Follow the instructions in the operating instructions.
313 082 600 001
313 082
e13 00-0019
Mercedes-Benz C Class – All models (as of June 1993);
Mercedes Benz, CLK coupé and convertible (not for 430 engines)
GB
9