Start Screen; Menu - Stiebel Eltron FEK 2 Utilisation Et Installation

OPERATION

Menu

4.2 Start screen

Mo MO
8
22°
7
6
5
1 date
2 Frost
3 Outside temperature
4 Menu level
5 Time
Symbols
Symbol Meaning
Indoor temperature
Symbol for indoor temperature
Frost
If the outside temperature is below 3 °C, the snow-
flake symbol is displayed.
Outside temperature
Symbol for outside temperature
Comfort mode
The heating circuit is in the selected operating
mode.
ECO mode
The heating circuit is in the selected operating
mode.
Standby mode
Symbol is illuminated: The heating circuit is in the
selected operating mode.
Symbol is flashing: The heat pump is in the select-
ed operating mode.
Programmed operation
The heating circuit is in the selected operating
mode.
12 |
16.06. 16.06.
1
14°
2
4 3
6 Room temperature / rela-
tive humidity
7 Active operating mode
8 day
5. Menu
Note
If the heat pump manager is in summer mode, the
settings made at the appliance will have no effect.
Note
If standby mode is set at the heat pump manager, the
operating mode cannot be changed using the ap-
pliance. The "standby mode" symbol flashes on the
display.
Note
If there is no user activity for more than 1 minute (no
swiping and neither "MENu" nor "OK" is pressed), the
appliance display automatically reverts to the start
screen.
Note
If there is no user activity for more than 10 minutes
(no swiping and neither "MENu" nor "OK" is pressed),
the appliance display automatically quits the menu
structure and reverts to the start screen.
Recent parameter changes not yet been confirmed
with "OK" will be lost. The parameters retain the values
previously saved.
f use the sensor buttons to navigate to the required menu.
f
f Move your finger around the Touch-Wheel to make vari-
f
ous settings, depending on the menu.
Menu Function of the Touch-Wheel
Start screen Adjust the comfort temperature in the
rooms covered by the assigned heat-
ing circuit. If the WPM has switched to
ECO mode, the temperature cannot
be changed.
ECO Set a time period in which heating
should take place in reduced mode
(ECO temperature).
OPERATINg MOdE Change the operating mode of the
heating circuit.
Symbol Meaning
Comfort mode
The heating circuit is constantly kept
at the comfort temperature.
ECO mode
The heating circuit is constantly kept
at the ECO temperature.
Standby mode
The frost protection function is active.
The heating flow is calculated on the
basis of a set room temperature of
5 °C.
Programmed operation
Heating is provided according to the
time program (see menu item SET-
TINgS / HEATINg PROgRAM). Switch
between comfort temperature and
ECO temperature
INFO Call up information on current tem-
peratures and relative humidity.
FEK 2