Charge The Battery - WOOX R4957 Guide De Démarrage Rapide

English

Charge the battery

1. Make sure included batteries are secure in the Doorbell in the
correct polarity opsitions
2. Plug the Micro USB end of the USB cable into the back of the
video doorbell
3. Plug the other end of USB cable into a DV 5V USB power supply
NOTE: not to be charged with USB wall chargers exceeding 5V.
Chargeing the batteries from flat will take up to 10 hours depending
on the output current of your wall charger. Any 18650-lithium
battery chargers can also charge the batteries.
Safety
• Read the manual carefully before use. Keep the manual for future
reference.
• Only use the device for its intended purposes. Do not use the
device for other purposes than described in the manual.
• Do not use the device if any part is damaged or defective. If the
device is damaged or defective, replace the device immediately.
• Do not expose the product to water or moisture.
• Do not touch the device with wet hands.
Cleaning and maintenance Warning!
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please
visit www.wooxhome.com
5