Parts Description; Before The First Use - Kasanova KWI000003 Manuel D'instruction

ELECTRIC BLENDER

PARTS DESCRIPTION

1. Lid with feeding shaft
2. Glass can
3. Blades
4. Speed button
5. Base

BEFORE THE FIRST USE

• Take the appliance and accessories out the box.
Remove the stickers, protective foil or plastic from
the device.
• Place the device on a flat stable surface and
ensure a minimum of 10 cm. free space around the
device. This device is not suitable for installation in
a cabinet or for outside use.
• Before using your appliance for the first time,
wipe off all removable parts with a damp cloth.
Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting the
device.
Voltage 220V-240V 50/60Hz 400W)
• Caution! Run the blender no longer than 1 minute continuous, after that
always cool the blender for 1 minute.
USE
• Place the base on a flat stable surface, not near a sink filled with water or a
similar setting. Make sure the appliance is not connected to the main supply
and the speed selector is in the 'off' position.
• Select '1' for the slow modus , select '2' for a faster mode, select 0 to turn
off the appliance. For a short and fast operation, select the Pulse mode, you
need to hold down the switch in this position, not longer than 1 minute, due to
possible overheating of the engine. Allow the unit to cool down before further
use.
instruction manual
1
2
3
4
5
7