Hornbach C800 Manuel D'installation Et De L'utilisateur page 208

16a
Door bracket mount
Position the top edge of the
bracket 5-10 cm below the top
edge of the door, or directly 4x
5 - 10 cm 5 - 10 cm
below any structural support
across the top of the door.
Drill fastening holes and fasten
with 4 self-threading screws.
16b
Alternately use machine bolts,
lock washers and nuts (not
included).
5 - 10 cm
17
Disconnect the trolley by pulling
the emergency release handle.
Attach the straight door arm to
the trolley with one of the short
shouldered shafts.
Fix the shaft with a cotter pin.
Brace the brackets of the cotter
pin to secure it in place.
208 | ENGLISH