Ec Declaration Of Conformity - Hilti DD100 Mode D'emploi

Masquer les pouces Voir aussi pour DD100:

Mode d'emploi (101 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Disposal

Most of the materials from

which Hilti power tools are

manufactured can be recycled.

The materials must be correct-

ly separated before they can be recycled.

In many countries, Hilti has already

made arrangements for taking back your

old electric tools for recycling. Please

ask your Hilti customer service depart-

ment or Hilti sales representative for fur-

ther information.

Disposal of drilling slurry

With regard to environmental aspects,

allowing drilling slurry to flow directly

into rivers, lakes or the sewerage system

without suitable pre-treatment is prob-

lematical. Ask the local authorities for

information about applicable regulations.

We recommend the following pre-treat-

ment:

Collect the drilling slurry (e.g. use a wet-

type industrial vacuum cleaner).

Allow the slurry to settle and dispose of

the solid material at a construction waste

disposal site (the addition of a flocculent

may accelerate the settling process).

Water from the drilling slurry (alkaline,

ph value > 7) should be neutralized by

adding an acidic neutralizing agent or

large quantity of water before it is

allowed to flow into the sewerage sys-

tem.

Printed: 07.07.2013 | Doc-Nr: PUB / 5069507 / 000 / 00

Only for EU countries

Disposal of electric tools together with

household waste is not permissible!

In observance of European Directive

2002/96/EC on waste electrical and elec-

tronic equipment and its implementation

in accordance with national law, electric

tools that have reached the end of their

life must be collected separately and

returned to an environmentally compati-

ble recycling facility.