Table des Matières
Publicité
ELEC
ELECTRICAL COMPONENTS
(Top view and port side view)
1 CDI unit
2 Oil pressure switch
3 Ignition coil
4 Charge coil
5 Lighting coil
6 Pulser coil
7 Spark plugs
8 Rectifier (marked 6G1)
Rectifier/regulator
(marked 6G8/6J8)
ELECTRICAL COMPONENTS
A Install the Pink lead onto the
oil pressure switch. Cover
the oil pressure switch after
tightening it.
B Cover the oil pressure switch
lead, ignition coil lead and
charge coil lead with the cor-
rugated plastic tube after con-
necting the same color leads.
C Install the connector in the
D Pass each high tension cord
E Pass the lighting coil lead on
8-1
proper direction as shown.
through the grommet.
the side of the flywheel
cover, next to the boss as
shown.
E
Publicité
Chapitres
Table des Matières
