Installation Instructions; Electrical System For Towing Hitch; General Data - Westfalia 300 028 391 101-002 Instructions De Montage

Installation instructions:

Electrical system for towing hitch

General data

WESTFALIA
300 028 321 001
Important notes
Read the installation manual prior to starting work.
The electrical kit should only be installed by qualified personnel.
Make sure prior to drilling that no objects such as cables, for example, are located behind the
covers.
Deburr any bare body parts, like bore holes, and seal them with the help of some rust inhibitor.
Caution – Disconnect the battery!
Danger of damage to the vehicle's electronic system. Data which are stored
electronically may get lost.
Read out the fault storage prior to starting work.
Use a closed-circuit current conservation unit if necessary.
Note
During installation, special attention has to be paid to the following points:
•
Cables may not be pinched or damaged.
•
All sealing elements have to be installed properly.
•
Lay the cables such that they do not rub on the vehicle and are not bent.
•
Do not lay any cables near the exhaust system.
•
Install the relays/controllers such that they are protected against the intrusion of moisture.
The cable connection should always face downward.
8
S.I.A.R.R. – No.
300 028 391 101-002
Installation instructions:
Charging lead extension
Ladeltg. Erweiterung