Numatic ETB 1120 Mode D'emploi page 9

6
7
8
Off-Aisle Cleaning Kit (Optional Extra Accessory) 606168
Failure to rectify the problem or in the event of a breakdown contact your
Nacecare dealer or the Nacecare Technical help line +44 (0) 900 1 905 785 0038
Fit the Brush / Pad (Fig 9).
Push in the deck
locking pin (Fig 10)
and rotate the
brush deck into
the operating
position (Fig 11).
Fig 9
Turn on the clean water tap (Fig 12).
Fig 12
To start: hold either trigger and press the yellow start button once
(Fig 13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 13).
Fig 13
Fill the clean-water tank to a Max of 11 gal (see page 11)
For operation and cleaning controls (see page 13)
Fig 10
9
Off
Fig 11
On