Adjusting The Volume - Bosch PRA 10,8 LI Notice Originale

OBJ_BUCH-2462-002.book Page 13 Friday, October 9, 2015 12:04 PM
Operation
 Protect the radio against moisture and direct sunlight.
The radio is suitable only for use in dry indoor areas.
Audio Operation
Switching On and Off
To switch on the radio, press the On/Off button 3. The dis-
play 8 is activated and the audio source selected the last time
the radio was switched off will be played.
Note: When operating for the first time with a battery or when
the radio has not been used for a prolonged period of time, it
may be necessary to press the On/Off button 3 repeatedly or
for longer to switch on the tool.
Each time after pressing a button, the display 8 is illuminated
for several seconds.
To switch off the radio, press the On/Off button 3 again. The
currently selected audio source will be stored.
To save energy, only switch the radio on when you are using it.

Adjusting the Volume

A medium volume (value of 10) is always set when you switch
on the radio.
To increase the volume, press the "Vol +" button 6; to reduce
the volume, press the "Vol –" button 5. The volume setting
"VL" is indicated with a value between 0 and 20 for a few
seconds in indicator e on the display.
Before adjusting or changing a radio station, set the volume to
a lower setting; before starting an external audio source, set
the volume to medium.
The sound can be switched off by pressing the "Mute" button
13. To switch the sound on again, either press the "Mute"
button 13 once more or either of the "Vol +" 6 or "Vol –"
buttons 5.
Adjusting the Sound
An equalizer is integrated into the radio to ensure optimum
sound reproduction.
To manually change the bass level, press the "Equalizer"
button 4 once. "BA" is indicated on the display along with the
stored bass level value in the multi-function indicator e. To
manually change the treble, press the "Equalizer" button 4
again; "TR" as well as the stored treble value are indicated in
the multi-function indicator e.
The bass and treble levels can be adjusted between –5 and
+5. To increase the indicated value, press the "Vol + " button
6; to lower the value, press the "Vol –" button 5. The
changed values are automatically stored when indicator e
changes back to the time indication a few seconds after last
pressing either of the buttons.
Selecting an Audio Source
To select an audio source, press the "Source" button 14 until
the indicator f for the desired internal audio source (see
"Setting/Storing Radio Stations", page 13) or for the desired
external audio source (see "Connecting External Audio Sourc-
es", page 13) is indicated on the display:
Bosch Power Tools
– "FM": FM radio,
– "AM": AM radio,
– "AUX": external audio source (e.g. CD player) via the
3.5 mm socket 22.
Setting the Rod Antenna
The radio is supplied with the rod antenna 7 mounted. When
listening to the radio, swing the rod antenna in the direction
that provides the best reception.
If it is not possible to achieve sufficient reception, place the
radio in a location with better reception.
Note: Operating the radio in the immediate vicinity of radio
units, wireless equipment or other electronic devices may
impair the radio reception.
Setting/Storing Radio Stations
Press the "Source" button 14 until "FM" is indicated for the
ultra-short wave reception range or "AM" for the medium
wave reception range in display element f.
To set a certain radio frequency, press the
12 to increase the frequency or the
crease it. The current frequency is shown in indicator a on the
display.
To scan for radio stations with a high signal strength,
press and briefly hold the seek button 12 or the
button 11. The frequency of the found radio station is shown
in indicator a on the display.
If a suitable signal has a sufficiently strong reception, the
radio automatically switches to stereo reception. The stereo
indicator c will appear on the display.
To store a set station, press one of the preset buttons 9 for
3 seconds. As soon as "PR" and the number of the selected
preset button appears in display element e, the station is
stored.
A total of 5 FM and 5 AM stations can be preset. Please note
that an already occupied preset is overwritten when a new
radio station is assigned to it.
To start the playback of a stored station, briefly press the
respective preset button 9. "PR" as well as the preset number
of the station are indicated in display element e for a few
seconds.
Connecting External Audio Sources
Apart from the integrated radio, various external audio
sources can be played.
Remove the protective cap of the "AUX IN" socket 22. Insert
the angled 3.5 mm plug of the AUX cable 26 into the socket
(see illustration on the graphics page). Connect the second
plug of the AUX cable to an appropriate audio source.
For playback of the connected audio source, press the
"Source" button 14 until "AUX" appears in indicator f on the
display.
After removing the plug of the AUX cable, reattach the protec-
tive cap of the "AUX IN" socket 22 again to protect against
dirt/debris.
English | 13
seek button
seek button 11 to de-
seek
1 609 92A 1RZ | (9.10.15)