Control Panel - SEVERIN BM 3991 Mode D'emploi

CONTROL PANEL

A Display
The display shows the selected programme, level of browning, weight, remaining running time
and programme status. An active programme is indicated by the continuously flashing colon in
the time display.
B Main indicator light
C Button
This button starts the selected programme.
A beep signal is heard, and the colon in the time display starts flashing.
To end the programme, keep the button pressed for 3 seconds. This is acknowledged by a beep
signal.
D Timer + and -
Programmes 1, 2, 3, 4, 7 and 9 may be started with a delayed timer setting, enabling the selected
programme to finish up to 15:00 hours later.
Example:
You want to start the programme at 20:00, and you would like your bread to be finished at 7:30
the next morning. Accordingly, the total programme running time will be 11 hours and 30
minutes.
- Use the
- Press the appropriate timer button + or - until the display shows a total running time of 11:30.
- Add the ingredients following the instructions given in the section Operation. Avoid any
contact between the yeast and fluids or salt.
• Do not use the timer function where a recipe requires the use of perishable ingredients such as
eggs, fresh milk or fruit.
E Programme
Press the
The programme code appears in the display.
F Browning
Baking programmes 1, 2 and 3 allow for a pre-selection of the desired level of browning: three
settings are available. The level of browning selected is indicated by an arrowhead in the upper
part of the display.
LIGHT
MEDIUM
DARK
QUICK
In addition, a quick-programme can be selected for programmes 1 to 3.
With this setting, the dough processing time is shortened by 60 to 75 minutes.
G Loaf weight
Baking programmes 1, 2, 3 and 4 allow for pre-selection of the loaf size. The selected weight is
indicated in the form of an arrowhead symbol beneath the corresponding bread symbol on the
button to select the desired programme.
- button to select the desired programme.
23