Lenze 8200 motec Instructions De Montage page 98

4
Electrical installation
Mains connection / brake resistor
Fuses and cable cross−sections
Type mains
E82MV551_4B
3/PE AC
E82MV751_4B
320 ... 550 V;
E82MV152_4B
45 ... 65 Hz
E82MV222_4B
1)
Use UL−approved cables, fuses and fuse holders only.
UL fuse: 500 ... 600 V, tripping characteristic "H", "K5" or "CC"
2)
Pulse−current or universal−current sensitive earth leakage circuit breaker
Observe national and regional regulations
Please observe the following when using e.l.c.bs.:
E.l.c.bs must only be installed between mains supply and controller.
l
Earth leakage circuit breakers can be activated although not required
l
by
– capacitive leakage currents of the cable shields during operation
(especially with long, shielded motor cables),
– simultaneous connection of several controllers to the mains supply.
8200 motec in parallel connection
Type Mains
current
E82MV551_4B 1.8 A
E82MV751_4B 2.4 A
E82MV152_4B 3.8 A
E82MV222_4B 5.5 A
The sum of mains currents must not exceed 23mA!
1)
IMPORTANT
2)
Observe national and regional regulations
96
Installation to EN 60204−1
Fuse E.l.c.b.
M6 A B6 A
M6 A B6 A
M6 A B6 A
M10 A B10 A
Mains contactor required for connection of:
1 motec 2 motec
1)
4 kW 15 kW
2)
4 kW 5.5 kW
Mains contactor determined by inrush currents.
Mains contactor for operation with mains choke 1.5 mH/24 A (order No.
ELN3−0150H024) or current limitation module E82ZJ004 (max. 20 A/phase).
EDK82MV222 DE/EN/FR 8.0
Installation to UL
L1, L2, L3, PE Fuse
2
[mm ]
1 5 A
1 5 A
1 5 A
1.5 10 A
3 motec 4 motec
1) 1)
15 kW 22 kW
2) 2)
7.5 kW 11 kW
1) 2)
FI
L1, L2, L3, PE
[AWG]
18
18
³ 30 mA
18
16
5 motec 6 motec
1) 1)
22 kW 22 kW
2) 2)
11 kW 11 kW
L
1)
2)