Makita DUM111 Manuel D'instruction page 11

2. Align the protrusions on the grass receiver with
the grooves on the tool by sliding the grass receiver
toward the front of the tool and moving it in the direction
of the arrow.
NOTICE:
Do not attach the hinge of the grass
receiver to the tool forcibly after aligning the pro-
trusions on the grass receiver with the grooves
on the tool.
Removing the grass receiver
1. Release the protrusions on the grass receiver
from the grooves on the tool while sliding the grass
receiver toward the front of the tool.
► 1 . Grass receiver
2. Release the hinge of the grass receiver from the
tool.
Installing or removing the shear
blades for grass shear
NOTICE:
If the parts other than the shear blades
such as the crank are worn out, ask Makita
Authorized Service Centers for parts replacement
or repairs.
Removing the shear blades
1. Remove the grass receiver if it's installed. Place
the tool upside down.
2.
While pressing the lock lever, turn the undercover
counterclockwise until
with
► 1 . Undercover 2. Lock lever
3. Remove the undercover, shear blades, and crank.
1
► 1 . Undercover 2. Shear blades 3. Crank
11 ENGLISH
on the undercover is aligned
on the lock lever.
1 2
1
2
3