Specifications - WIKA PU-448 Mode D'emploi

2. Specifications

2. Specifications
Specifications
GB
Software
USB interface
Electrical parameters
Voltage supply
Power supply
Connection to computer
Connection to transmitter
Output voltage
Ambient conditions
Operating temperature
Storage
Dimensions
Case
■
Test clip cable
■
For further specifications see WIKA data sheet AC 80.16 and the order
documentation.
6
Temperature -40 ... +85 °C
■
Humidity
■
WIKA operating instructions programming unit PU-448
Model PU-448
USB connector type A to 9-pin sub-D
connector
The PU-448 and therefore also the
connected transmitters/resistance
thermometers are powered through the
USB port. Thus no additional voltage supply
is needed.
100 mA @ +5 V, via USB port
USB connector
2 x banana plugs Ø 2 mm
■
(with magWIK quick connector)
Adapter cable for M12 connector
■
Adapter cable for angular DIN connector,
■
form A
Max. 18 V
0 ... 50 °C
0 ... 95 % relative humidity
75 x 33.3 x 15 mm, ABS industrial case
2 m (2-wire)