Making And Answering Calls; Wall Mounting Instructions - LEXIBOOK CP050BBi1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Make a call
1. Lift the handset and wait for the dial tone.
2. Dial the telephone number using the keypad.
Answering a call
When the telephone rings, just lift the handset to answer the call.
REDIAL
To make a repeat call to the last number you dialed:
1. Lift the handset and wait for the dial tone.
2. Press the REDIAL key.
MUTE
While you are on a call, to mute the mouthpiece:
Press and hold MUTE.
Please read carefully the instructions on this
template before you start to wall mount your
telephone. If you prefer, you can place it on a
level surface.
BE CAREFUL – Check that there are no
electrical wires hidden in the wall.
1. Mark the fixing centers on the wall.
The marks should be 82mm apart.
2. Screw in the screws at the two marked
locations, leaving approximately 7 mm (1/4")
between the wall and the screw head.
3. Tuck the telephone line cord into the
grooves of the cradle.
4. Hang the cradle on the screws using the
wall mounting slots on the underside of the
unit. You may need to remove the telephone
from the wall and tighten the screws so that
the cradle is securely fixed and does not
wobble.
5. Place the handset on the cradle using the
base's parking hook and the parking recess
under the earpiece on the handset.
12
CP050BBi1IM0288.indb 12

Making and answering calls

Wall mounting instructions

82mm
17/7/08 15:11:35

Publicité

Table des Matières
loading

Table des Matières