WIKA MH-1 Mode D'emploi page 17

9. Specifications
Specifications
Materials
Wetted parts
■
Non-wetted parts
■
Pin assignment
Short-circuit resistance
Reverse polarity protection
Insulation voltage
1) Including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error
per IEC 61298-2).
Process connections
Standard Thread size
DIN 3852-E G ¼ A
ISO 6149-2 M14 x 1.5
Electrical connections
Description
Circular connector M12 x 1, code A, 4-pin
Angular connector DIN EN 175301-803 form C, 3-pin
Cable outlet (0.5 / 1 / 2.5 m), 3-pin
1) The stated ingress protection only applies when plugged in using mating connectors that have the appropriate
ingress protection.
For further specifications see WIKA data sheet PE 81.21 and the order documentation.
WIKA operating instructions, pressure transmitter, model MH-1
Model MH-1
Stainless steel
Stainless steel
see product label
S+ vs. U-
U+ vs. U-
DC 500 V
Sealings
FKM/FPM
-40 ... +125 °C
-20 ... +125 °C
NBR
-30 ... +100 °C
-30 ... +120 °C
Ingress
1)
protection
IP67
IP65
IP69K
EN
17