Package Contents - Lindy 38263 Guide D'installation Rapide

User Manual
Introduction
Thank you for purchasing the Video Over IP Controller. This product has been designed to provide trouble free,
reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct
use, please read this manual carefully and retain it for future reference.
This Video Over IP Controller enables the management and configuration of multiple Video over IP (VoIP) extenders
(No.38266 and 38267) through a single WebGUI, that provides the complete status of all connected transmitters
(No.38266) and receivers (No.38267), including IP address, channel selection and video preview. It also features
local console ports including an HDMI output and one USB port for the connection of a keyboard or mouse (or both
via a USB hub), to view and interact with the WebGUI.

Package Contents


Video Over IP Controller

Multi-country 5V DC 2.6A PSU, 5.5mm / 2.1mm with EU, UK, US and AUS adapters

1 x terminal block (3-pin)

3 x terminal block (5-pin)

3.5mm to IR extender cable

Remote control (with included CR2025 battery)

4 x rubber feet

OSS statement

Lindy QIG (Quick Installation Guide)
Features

Enables the management and configuration of multiple Video over IP (VoIP) extender (No.38266 and 38267)
through a single WebGUI

Supports point-to-point (unicast) and multipoint-to-multipoint (multicast) routing selections

Controls both Matrix and TV wall configurations using WebGUI presets

Definable display groups to simplify large installations

WebGUI provides the complete status of all connected transmitters (No.38266) and receivers (No.38267),
including IP address, channel selection and video preview.

Local console featuring an HDMI output and one USB port for the connection of a keyboard or mouse (or both
via a USB hub), to view and interact with the WebGUI
Specifications

Control modes: WebGUI (remote or local), RS-232, Telnet, Trigger and IR Remote

RJ45 Gigabit Ethernet port with PoE support (802.3af)

Output port: 1 x HDMI Female (resolution: 1920x1080@60Hz)

Control ports: 1 x RS232 (3 pin terminal block), 8 x Trigger Contacts (10 pin terminal block), 1 x USB Type A
Female, 2 x RJ45, 1 x Factory Reserved Connector (5 pin terminal block)

IR Frequency: 30 – 50kHz

Power Consumption: 2.99 W

Operating Temperature: 0°C - 40°C (32°F - 104°F)

Storage Temperature: -20°C - 60°C (-4°F - 140°F)

Operating Humidity: 20% - 90% (non-condensing)

Storage Humidity: 20% - 90% (non-condensing)
English