ARIETE EcoPower 6233 Mode D'emploi page 10

ted to the power supply.
The appliance must be used and rested on a stable sur-
•
face.
The appliance is not to be used if it has been dropped, if
•
there are visible sign of damage or if it is leaking. Do not
use the appliance if the power cord or the plug are dama-
ged, or if the appliance is faulty. To prevent any accident,
all repairs, including the replacement of the power cord,
must be carried out by an Authorised Service Centre or,
in any case, by qualified personnel.
• Fill up the tank with water before starting up the appliance. Be sure to unplug the appliance before pouring water into the
tank.
• When filling the water tank, always use the measuring cup (P) provided. Never put the iron directly underneath the tap.
• Close the cover after filling, making sure that it is perfectly closed.
• Avoid putting excessive quantities of water into the tank.
• Choose a sufficiently well lit and clean environment, with an easily accessible electric socket.
• Turn on the appliance only when it is in working position.
• The appliance may give out a little smoke when used for the first time; This transitory effect is perfectly normal and is due
to the fact that some of components have been slightly lubricated.
• During use, rest the appliance onto a horizontal surface.
• Never leave the appliance unattended when it is connected to the power supply.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• When you have to leave for even a short period of time, turn off the iron, place it on its stand and always unplug the power
cord.
• Do not use the appliance if the power cord appears to be damaged, with parts bearing burns, etc..; an authorised Ariete
service centre must repair and replace the power cable; under penalty of the warranty being forfeited.
• Never try to iron garments being worn.
• Do not touch the metal parts of the iron when in operation and for several minutes after it is turned off since it could cause
burns.
• Do not aim the jet of steam towards parts of the body or pets.
Place the appliance on a stable surface where it can not
•
tip over.
• Remove any labels and protections from the soleplate before using the appliance for the first time.
• Always unwind the power cord before use.
• Do not use sparkling (carbonated) water. If your water supply is very hard, we suggest you use demineralised water
instead.
• Do not place the iron on top of the power cord when it is hot.
• Do not bend the power cord protection when it is wrapped around the iron: the cord could break with time.
• Do not pull the power cord to unplug the appliance.
• The appliance must only be cleaned with a soft, slightly damped, cloth after unplugging the iron and allowing all its parts
to cool down. Never use solvents which may damage the plastic parts.
• Do not wrap the power cord around the soleplate when the iron is hot.
• Do not put the soleplate in contact with metal surfaces.
• Always take off the appliance turning the temperature control knob to "MIN" and disconnect the main plug from the wall
socket before filling the iron with water or pouring the remaining water out.
10
Warning of burns
Warning – material damage