Installation Instructions; Identify The Vent Location; Measure Dimension To Fit - ubbink Rolux Vent system condensation Instructions Pour L'installation

Installation Instructions

¨
Rolux Horizontal Condensing Discharge Vent System
1

Identify the vent location

NOTE
Cover the top of the appliance
Cover the top of the heater
to prevent debris from
to prevent debris from
entering when cutting
entering when cutting
Steps:
- Place the 90° Vent Pipe Elbow on the appliance.
- Mark position on wall
- Or use template provided with water heater
- Cut hole, covering the top of the water heater to prevent debris from entering

Measure dimension to fit

2
Reference page 4 of these installation instructions for the acceptable pitch direction.
10
D = 5.5" (140 mm)
2.5 60
3
0.75
55
Inner Pipe
White Outer Pipe
3.75