Nilfisk Advance EDS BA 551 Manuel D'utilisation page 89

Types of brushes available
305 mm-models
08603842 - Prolene
08603872 - Midlite Grit 180
08603873 - Midgrit 240
08603874 - Prolite
08603875 - Union Mix
Brush/pad application guide (suggestions only)
Models
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
Cylindrical brush installation/removal (only for BA 551 CD)
1. Turn the ignition key (80) to "0" position.
2. Lift the cylindrical brush deck by pressing the pedal (11).
3. Remove the handwheels (A, Fig. 3) and the lids (B) by pushing them downwards and pressing on the handwheels.
4. Install the cylindrical brushes (C).
The cylindrical brushes can be installed on either sides.
5. Install the lids (B) and fasten them with the handwheels (A).
6. To remove the cylindrical brushes, carry out steps 1 to 5 in the reverse order.
A
B
C
909 6752 000(2)2006-10 A
530 mm-models
08837025 - Prolene
08837028 - Midlite Grit 180
08837029 - Midgrit 240
08837026 - Prolite
08837027 - Union Mix
Midlite Grit 180 Midgrit 240
D
Figure 3
USER MANUAL
Prolene Prolite
C
E
Union Mix
A
B
S311318
19