Led Flashlight - Midland ENERJUMP Manuel D'utilisation

terminal within 30 seconds.
7. Leave the vehicle's engine running for a few minutes.
8. If the vehicle does not start on the first trial, wait for 1 minute before
trying to start the vehicle again.
CHARGING A MOBILE DEVICE WITH USB PORT
Plug the USB cable to the USB 5V-2A output port .
Connect the other end of the cable to your device. The charging lights
will be on when charging.

LED FLASHLIGHT

Press the switch button for 3 seconds to turn on the flashlight. Press
it again slightly and the flashlight will light up in 4 different modes in
sequence (normal, strobe, SOS, off).
STR ENERJUMP.indd 11
Switch
Flashlight
ENERJUMP - 11
14/10/14 15.44