Troubleshooting - ULTIMATE SPEED USSW 300 B2 Consignes D'utilisation Et De Sécurité

z Troubleshooting
Problem
No output voltage
Low output voltage
The signal for low
battery voltage
sounds repeatedly.
Possible cause
The car power
inverter is
1
overloaded.
The input voltage is
below 10.5 V.
The input voltage is
below 12 V.
The battery is
defective.
Insufficient voltage
supply or power
supply.

Troubleshooting

Solution:
Reduce the load until
it no longer exceeds
the maximum load
given in the technical
specifications.
Keep the input voltage
of the car power
inverter over 10.5 V
in order to maintain an
output voltage.
Keep the input voltage
of the car power
inverter over 12 V
order to maintain a
constant output voltage.
Replace the battery.
Check the condition
of the socket for the
electrical system and
the 12 V motor vehicle
cigarette lighter plug
and clean them if
12
necessary.
GB/IE/NI/CY/MT
,
in
,
25