ULTIMATE SPEED USSW 300 B2 Consignes D'utilisation Et De Sécurité page 24

Instructions for operation
Attention!
You must not use a fuse with a
different value!
Before switching the car power
1
inverter back on, ascertain
why the fuse tripped.
In order to replace the 20 A flat
motor vehicle fuse
follows:
Pull the flat motor vehicle fuse
„
13 out of the fuse holder
You can easily pull the fuse
out using a motor vehicle fuse
puller (see Fig. E). This is not
included with the delivery.
24 GB/IE/NI/CY/MT
13 , proceed as
9
.
Insert a new fuse of equal
„
value.
In order to replace the 10 A
glass fuse 19
lighter plug 18
follows:
Unscrew the fuse screw plug
„
21
. The fuse is located below
this plug.
When doing this, make sure
„
you do not lose the loosely
inserted contact pin
Remove the defective 10 A
„
glass fuse 19 .
Insert a new 10 A glass fuse
„
of equal value
Insert the contact pin
„
the fuse screw plug
screw the fuse screw plug
back onto the 12 V cigarette
lighter plug 18
in the cigarette
, proceed as
20 .
19 .
20 into
21 and
21
.