Electrical Safety - ULTIMATE SPEED USSW 300 B2 Consignes D'utilisation Et De Sécurité

Safety instructions
The device becomes
„
warm during use. There is
a risk of burn injuries from
touching the hot surfaces.
Take care to ensure that
„
sand, dust and other
small foreign objects
cannot enter the air inlet
or air outlet openings.
Do not operate the
„
device near to flammable
liquids or gases. Do not
use the device to draw in
hot fumes. Failure to do
so risks causing a fire or
explosion!
Switch the device off and
„
disconnect the device
from the voltage supply:
–
When you are not
using the device;
–
If you are leaving the
device unsupervised;
–
If you are doing
cleaning work;
–
If the connection cable
is damaged;
–
If foreign objects have
got into the device or
16 GB/IE/NI/CY/MT
you notice unusual
noises.
Only use the acces-
„
sories supplied and
recommended by the
manufacturer.
Do not disassemble or
„
modify the device. This
device must only be
repaired by a mainte-
nance technician.
Do not store in places
„
where the temperature
can exceed 65 °C.
Only use in an ambient
„
temperature between
5 °C and 40 °C.
Only use the adapter
„
cable as supplied with
the device.
CAUTION:
How to avoid acci-
dents and injuries
resulting from electric shock:

Electrical safety

Do not use the device
„
if the switch cannot be