Fire Hazard - ULTIMATE SPEED USSW 300 B2 Consignes D'utilisation Et De Sécurité

Safety instructions
system must have inter-
nal positive polarity, i.e.
the positive terminal of
a vehicle battery must
not be connected to the
chassis of the vehicle.
Before connecting the
„
inverter, check that the
socket for the electrical
system is sufficiently
fused. This fuse protection
must not be bypassed
or altered, under any
circumstances.
Only use the connection
„
cable delivered with the
product.
You must not open or
„
repair the housing of the
device. If you do, then
the safety of the device
is no longer assured and
the guarantee will be null
and void.
The device is only
„
suitable for use
indoors.
14 GB/IE/NI/CY/MT

Fire hazard!

Do not use the device
„
near hot surfaces.
Do not position the
„
device in places which
are exposed to direct
sunlight. Otherwise it
could overheat and be
damaged beyond repair.
Do not use the device in
a vehicle which is parked
in the sun.
Never leave the device
„
unattended when it is
being used.
Do not cover the
„
ventilation slots of the
fan when the device is
switched on.
Do not place any open
„
ignition sources such as,
for example, candles on
the device.
Both connection cables
„
can get warm under high
loading.
Due to the high transfer
„
resistances, using the
cable with 12 V motor