arjo ENT-ACC07 Mode D'emploi page 5

ENT-ACC14 Four Hook Adapter
This accessory is attached to the syringe pump holder at right angles to the fixed
hooks.
Installation
Ensure the accessory hooks are securely fitted on the syringe pump
holder before use.
Cleaning
For decontamination instructions, refer to the bed instructions for use.
Product Weight
End of Life Disposal
Components that are primarily be made up of different kinds of metal (containing more than
90% metal by weight) for example sling bars, rails, upright supports, etc., should be
recycled as metals.
Indicates the product is a Medical Device according to
EU Medical Device Regulation 2017/745
CE marking indicating conformity with European Community harmonised
legislation
Mandatory to read the Instructions for Use
Remove all equipment from the
syringe pump holder.
Position the accessory (3) in the
slots on top of the fixed hook
moulding, then push it down as
far as it will go (4).
The maximum Safe Working
Load is the same as for the
fixed hooks (2kg per hook).
WARNING
1.7kg
3
4