Kapro Prolaser 895 All-Lines Manuel D'utilisation page 10

6. The vertical lines can be accurately positioned using the micro-
adjusting screw.
7. To activate Detector (Pulse) mode, press the P button on the keypad.
The Detector mode indicator will light up.
8. Before moving the laser level, turn off and lock the safety lock. The
power LED will turn off.
Leveling Slopes (manual mode)
The 895 Prolaser
for setting slopes.
1. Make sure that the unit is turned off (safety lock closed,
power LED off).
2. Press the Manual Mode button. The Manual Mode LED will light.
3. Press one or both of the Output Control buttons to generate
required lines.
4. Set the unit to the required slope, by adjusting the support legs or
the tripod.
Laser Detector (sold separately)
The Prolaser
together with the Laser Detector.
Use the Laser Detector when it is hard to see the light beam, such as
outdoors or in bright rooms.
Attach the Laser Detector to a rod if the laser unit is positioned above
head height.
10
All-Lines laser level can be operated in manual mode
®
895 All-Lines is effective at up to 130ft (40m) when used
®