8. Faults / 9. Dismounting, return and disposal
GB
9. Dismounting, return and disposal
9.1 Dismounting
9.2 Return
18
CAUTION!
If deficiencies cannot be eliminated by means of the measures listed above, shut
down the instrument immediately, and ensure that pressure and/or signal are no
longer present, and secure the instrument from being put back into operation
inadvertently. In this case, contact the manufacturer. If a return is needed, please
follow the instructions given in chapter "9.2 Return".
WARNING!
Residual media in dismounted pressure transmitters can result in a risk to persons,
the environment and equipment.
Take sufficient precautionary measures.
WARNING!
Only disconnect the pressure transmitter once the system has been
depressurised!
WARNING!
Absolutely observe when shipping the pressure transmitter:
All pressure transmitters delivered to WIKA must be free from any kind of
hazardous substances (acids, leachate, solutions, etc.).
WIKA operating instructions pressure transmitter model MG-1