General; Safety Tips - Becker Centronic SunWindControl SWC510 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
The SWC510 can be used to control a mains-connected drive via radio signals.
The threshold values for sun protection and wind control can be set with the
following transmitters: Centronic SunWindControl SWC441, SWC411 and
SWC545.
This device is excellent because it is so easy to operate.
Caution
Please keep the instructions in a safe place!
• Risk of injury by electric shock.
• All electrical installations to a 230 V power network must be per-
formed by an authorised electrician.
• Before assembly, disconnect the power lead from the supply.
• When installing the system, the provisions set down by local public
utilities and the stipulations for wet and damp rooms in accordance
with VDE 100 must be observed.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• Please refer to the specifications given in the operating instructions
for the sun protection system
14

General

Safety tips