instruction manual
oPerAtion - General
The appliance is intended only for domestic use, not for professional use.
17
9
11
1. Tube connection and release button
2. Dust container release button
3. On/off switch
4. Handle
5. Charging port
6. Exhaust opening
7. Dust container
8. Dust container bottom flap release button
oPerAtion - charging the battery
1. Plug the adapter's charging plug into the charging port (5) of the vacuum cleaner.
2. Plug the adapter (17) into the wall socket. The indicator lights on top of the appliance start flashing in red.
3. Allow the vacuum cleaner to charge (about 4 hours). The adapter may become slightly warm whilst it is
charging; this is normal and does not indicate that the appliance is defective. When the device is fully
charged, the indicator lights will stop flashing, then light up in green.
4. Remove the adapter plug from the mains socket. The indicator lights go out.
oPerAtion - use
A
1
10
8
12
13
9.
Motor-driven turbo nozzle
10.
Tube
11.
Parquet brush tool
12/13. Large brush tool / Furniture suction nozzle
14/15. Small brush tool / Crevice tool
16.
Wall mount
17.
Adapter
23
2
7
14
15
B
3
4
5
6
16
1
2