Cleaning; Technical Data; What To Do If - Becker Centronic MemoControl MC415 Notice De Montage Et D'utilisation

Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Rated voltage
Battery type
Degree of protection
Permissible ambient temperature
Radio frequency
Problem
Drive is not functioning.
Drive does not run in a 24-hour
rhythm.
Run times are not programmed.
20 - en

Cleaning

Technical data

What to do if...?

Insert a new battery.
Insert the battery correctly.
Reduce the distance to the receiver.
Transmitter is not programmed in the
receiver.
Program transmitter.
Transmitter is not set to the correct
channel.
Set the changeover switch to " ".
Program switching times.
Power failure at the drive. Re-pro-
gram switching times.
3 V DC
CR 2430
IP 20
-10°C to +55°C
868.3 MHz
Remedy