Operation; Switches; Power Switch; Motor On/Off Switch - Coltene CanalPro CL2 Notice D'utilisation

CanalPro CL2 Cordless Handpiece
TM
4.0

Operation

4.1

Switches

4.1.1 Power Switch

4.1.2 Motor On/Off Switch

4.1.3 Program Switch

4.1.4 Select Switch

Speed (SP)
Torque (TRQ)
Gear Ratio (GR)
Run Mode (PRG)
8
4.1.1.1 To turn it ON, press and hold the switch for longer than 1 second
when the power is OFF.
4.1.1.2 To turn it OFF, press and hold the switch for longer than 1 second
while the power is ON.
4.1.2.1 Simply pressing this switch will turn the motor on or off depending
on its current state (ON or OFF).
4.1.3.1 Toggles through mode 1, 2, 3 and 4 for each time the switch
is pressed. The preset values (speed, torque and gear ratio) are
displayed as each mode is selected.
4.1.4.1 Pressing this switch will change the menu item selected. The
operation of this switch is dependent on whether the handpiece is
on or off.
4.1.4.1.1 If the handpiece is off this switch will toggle between
Speed, Torque, Gear Ratio, Run Mode and Speed.
4.1.4.1.2 If the handpiece is on this switch will toggle between
Speed and Torque.
—
—
—
—
Menu Item Descriptions
Speed can be adjusted by pressing the increment
or decrement switch.
The torque of the handpiece is adjustable.
Sets the gear ratio of the contra angle which is
connected to the unit.
Selects the mode of the handpiece.