Asko T884HP XLW Notice D'utilisation page 25

ORIENTATION DE LA PORTE
La porte peut être attachée à droite ou à gauche.
Suivre les instructions suivantes:
1. Retirer la plinthe.
2. Retirer les charnières (deux vis).
3. Tout en la soutenant, faire glisser la porte vers le
haut et la retirer.
4. Remove both door pins (top and bottom). Fit them on
the other side of the machine. Replace the hinge.
5. Also change the hole plug (A) (on top) and the door
hinge bushing (B) (at the top and on the bottom), and
replace them on the other side of the door.
(A)
Use a fl at screwdriver to remove the plugs.
NOTE!
Be careful not to damage the appliance with the
screwdriver.
pin
(B)
Customer Care Center, 1-800-898-1879, www.askousa.com
6. Loosen and remove the catch (lift up and pull out)
and the cover plate on the door and the machine.
Switch the catch and the cover plate.
1
2
7. Refi t the door by loosening the hinge screws slightly,
affi xing the door and closing it. Retighten the hinges.
Replace the plinth.
25