AEG FT 4919 Mode D'emploi page 70

English
70
Scan Op- In Scan mode, the current surface tempera-
eration ture is displayed. This does not mean the
body temperature. This is useful for checking
the temperature of an object (e.g. a milk
bottle).
Please refer to the chapter "Use of the
Thermometer" to learn how to measure a
surface temperature.
Stop Watch The built-in stop watch assists you with
checking the pulse. The heartbeat is an
important indicator of the vital functions of
the body.
Please refer to the chapter "Use of the
Stop Watch" for measuring the pulse.
Fever Alarm When the thermometer detects a tempera-
ture exceeding 37.5°C in the "Ear" mode, it
will sound an alarm. At first, you will hear a
long signal tone, then three short tones. This
is to warn the user of potential fever.
Memory There are 9 memories for ear measurement
results. Each memory records the measure-
ment together with date / time / operation
mode/measuring point information.
When the device is on, press the "ON/
MEM" button. The symbol "
displayed and you can read the tempera-
ture value.
°C / °F With the clock set first (see set clock),
Toggle the display shows "date, time and room
temperature". Press and hold the "SCAN"
key. Press and release immediately the
"ON/MEM" button. After 3 seconds, the
display will be switched from "°C" to "°F".
(The same way, you get back to "°C".)
" will be