Using The Cooktop; Control Knobs; Operation Of The Burners - Thermador PROFESSIONAL PRO GRAND PRD30 Guide D'utilisation Et D'entretien

Using The Cooktop

Operation of the STAR
Your new range has sealed STAR burners. There are no
burner parts under the cooktop to clean, disassemble or
adjust. The cooktop features four or six gas surface
burners; each rated at 18,000 BTU/HR (15,000 BTU/ HR
using Propane).
Each burner has a unique QuickClean
which allows the burner and area around the burner to be
easier to clean.
On all models, the two left burners have the exclusive
®
ExtraLow feature, the remaining burners are standard.
Each burner has its own control knob.
ExtraLow ExtraLow ExtraLow Standard Standard Standard
Standard Standard Standard
ExtraLow ExtraLow ExtraLow
English 12
®
Burners
Star ®
Figure 8: STAR Brass Burner Base
TM
base feature
Standard Standard Standard
Griddle Griddle Griddle
Standard Standard Standard
Figure 9: Burner Power Features

Control Knobs

The control knobs for two gas burners, one in front and one
in the rear, are located directly in front of and below the pair
of burners on the control panel.
The symbol above each control knob identifies either the
burner position on the cooktop or the griddle control,
depending upon your model.
Knob Knob Knob
Figure 10: Standard Burner Control Knob
Left Rear Center Rear
Left Front Center Front

Operation of the Burners

• Press in on the knob and turn it counter-clockwise to
the HI setting on the knob.
• The igniter for the selected burner clicks and sparks.
• After burner ignition, the igniter stops clicking.
• Rotate the knob to any flame setting between HI and
SIM.
• The blue signal light, between the burner knobs, will
light when adjacent burners are lit. The light will remain
on until the adjacent burners are turned off.
Bezel Bezel Bezel
Right Rear
Griddle
Right Front
Figure 11: Cooktop Symbols