Storz UG 130U Manuel D'utilisation page 70

68
Technical description
Technical data
Rated mains voltage 120 V
Line frequency 50/60 Hz
Response value ≤ 25 kOhm
Response time < 2 seconds
Power consumption 4 VA at 120 VAC / 50/60 Hz
Signal displays LED green: Operation
LED yellow: Isolation error
LED yellow: Transformer limit temperature reached
Transformer power utilization:
LED green: >30 %
LED yellow: >60 %
LED red: >90 %
Acoustic signal Pulsating with an isolation error, continuous tone with
excess temperature
Ambient operating temperature 0 °C ... +40 °C
Relative humidity 30 ... 75 %
Protection class II
Degree of protection IP 40
Dimensions of evaluation element 125 x 67 x 40 mm
[H x W x D]
Dimensions of control unit 80 x 44 x 24 mm
Observed standards EN 60601-1, EN 60601-1-2, EN 14971
Earth leakage monitor order no.: UG 400
Contains:
Control unit, evaluation element
and test plug
EMC limit value class: B (as per EN 55011+A2)
Only store in closed or roofed rooms,
storage temperature/transport temperature:
-10 °C to +60 °C, humidity 5 to 95 %
Do not expose the devices to chemical vapors
or gases which are corrosive, highly flammable,
combustible, explosive or conductive.
THIS DEVICE IS NOT SUITABLE TO BE USED IN
AN OXYGEN RICH ATMOSPHERE.
Description technique Descripciones técnicas