Installation Of Outdoor Unit - Giatsu GIA-CEN-10KOMP Manuel D'installation

3 Installation of Outdoor Unit

!
WARNING
· The air conditioner must be installed in the place, which is strong enough to support the weight of the machine.
· If it is not strong enough, the machine may fall down and cause some personal injury.
· The special installation must be performed against strong wind or earthquake.
· The falling-down because of incorrect installation may cause some accidents
· Air conditioners must be installed indoors or where the rain doesn't reach
3.1 Selection of installation position
1) Enough space for installation and maintenance.
2) No barrier at the air inlet and the air outlet and away from strong wind.
3) Dry and ventilated, make sure not exposed to rain and snow.
4) The flat supporting surface is able to bear the weight of the outdoor unit. The outdoor unit shall be horizontally installed, without any
noise or vibration.
5) Neighbors shall not be influenced by running noise and exhaust gas.
6) Without inflammable gas leak;
7) Convenient for installation of connecting pipe and electrical connection.
3.2 Dimensional drawing of outdoor unit (Unit: mm)
1)Fig.3-1 is applicable for models of GIA-CEN-10KOMP
2)Fig.3-2 is applicable for models of GIA-CEN-14KOMP; GIA-CEN-16KOMP
Fig. 3-1 Dimension of Outdoor Unit
.
Fig. 3-2 Dimension of Outdoor Unit
2
1516.37
1444.1
1387