Battery Installation - Echo DSRM-300 Manuel D'utilisation

Battery Installation

 The attachment will operate when the battery is in-
stalled, the power indicator LED is lit, and the trigger
A
and trigger lockout are engaged. Make sure the trimmer
B
is properly positioned to prevent loss of control and
C possible serious injury. Keep movable parts of the at-
tachment off the ground and away from objects that
could become entangled or thrown.
1. Make sure power to unit is turned off.
2. Align ridges (A) on battery pack with grooves in power head.
Slide battery pack into power head.
3. Assure the battery pack latch (B) snaps into place and bat-
tery pack is secure before beginning operation.
4. To remove battery, depress battery pack latch release (C)
slide battery pack out of power head.
IMPORTANT
Before using the hedge trimmer, make sure that battery is
set correctly with battery pack latch in the complete position
(D).
NOTE
 Battery pack latch is in the complete position when battery
pack latch is correctly engaged.
13
Before you start
WARNING