Important - Bissell LITTLE GREEN 1400 Série Guide De L'utilisateur

Operati s
Cleaning with the Tough Stain Tool
1. Attach the 3" Tough Stain Tool to the handheld
cleaning hose.
2. Plug in the unit and press the power button
beneath the handle to turn it on.
3. Hold the tool 1 inch above soiled surface.
4. Press the spray trigger to mist solution over
and onto the soiled area.
5. Release the spray trigger and gently scrub the
stain.
6. To lift the stain away, apply downward
pressure on the tool and slowly pull it toward
you. Watch as powerful suction removes the
dirt and cleaning solution. Continue until no
more dirt can be removed.
7. As a final step, use "drying strokes" (by not
pressing the spray trigger) to remove as much
moisture as possible. Repeat this step as often
as necessary.
Cleaning with the Hydrorinse™ Tool
1. Attach the HyrdoRinse™ tool to the cleaning
hose.
2. Hold the hose and attachment in an upright
position. Then hold down the trigger to rinse the
hose for 30 seconds.
3. The HydroRinse tool can be stored on the
right handle or on the hose in between use.
Tips
» Deep cleaning stairs and high-tra c areas on
a regular basis helps prolong carpet life.
» Check upholstery stu ng before cleaning.
Colored stu ng may bleed through the fabric
when it becomes wet.

IMPORTANT

Check the manufacturer's tag before
cleaning upholstery. "W" or "WS" on the
tag means you can use your Little Green.
If tag is coded with an "S" (with diagonal
strike-through), or says "Dry Clean Only,"
do not proceed. If manufacturer's tag is
missing or not coded, check with your
furniture dealer.
» If a signifi cant amount of water and solution
remains in the clean tank, your unit can be stored
with liquid in the clean tank.
www.BISSELL.ca
7