CLEANING (DO NOT USE ANY DETERGENT)
13
Always store iron on its heel rest. To clean exterior surfaces, use a damp soft cloth and wipe dry.
Caution: Do not use any chemical solvents, as these will damage the surface.
14
Replacing the de-calc box: If the descaling indicator is illuminated detach the water tank. Remove the de-calc box by
pulling it upwards. Immerse a new de-calc box in water for more than one minute, then place it inside the water tank.
Ensure the new de-calc box is correctly positioned, if not, the descaling indicator will keep flashing.
For the best performance we recommend cartridge from our range, reference number AEL06.
15
When finished using the appliance, turn the temperature dial to the OFF ("0") position. Store the iron on the iron
rest. Note: Do not store the iron with water in the tank.
Enjoy your new AEG product!
SAFETY ADVICE
Read the following instruction carefully before using machine for the first time.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Keep the iron and its cord out of reach of children less than 8 years of age
when it is energized or cooling down.
• The surfaces are liable to get hot during use .
• This product is appropriate for use with tap water. It is recommended to use
destilled water or a mix of 50% destilled, 50% tap water.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• The iron is not to be used if it has been dropped, if there are visible signs of
damage on the iron or its cord or if it is leaking.
• The appliance must only be connected to an earthed socket. If necessary an
extension cable suitable for 10 A can be used.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person, in order to
avoid hazard.
• The iron must be used and rested on a stable surface. When placing the iron
on its stand, ensure that the surface on which the stand is placed is stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched off and the mains plug withdrawn each
time after use, before cleaning and maintenance.
• The plug must be removed from the socket outlet before the water
reservoir is filled with water.
• The mains cable must not come into contact with any hot parts of the
appliance.
• Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum filling volume as indicated on the appliances.
www.aeg.com
DBS3350_SteamStation_AEG_NO-FARSI.indd 7
GB
DE
AR
ES
FR
GR
IT
NL
PT
7
2017-07-06 14:21:02