Safety Rules; Environmental Protection - Ryobi RFL180M Traduction Des Instructions Originales

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY RULES

■ Know your flashlight. Read user's manual carefully.
Learn its applications and limitations as well as the
specific potential hazards related to this flashlight.
■ Use only with recommended battery pack and
charger. Any attempt to use another battery pack will
cause damage to your flashlight and could possibly
explode, cause a fire, or personal injury.
■ Remove battery pack from flashlight before
replacing bulb or
maintenance or cleaning.
■ Do not disassemble your flashlight.
■ Do not place flashlight or battery pack near fire or
heat. This will reduce the risk of explosion and possible
injury.
■ Do not store your flashlight in a damp or wet
location, or in a location where the temperature may
reach or exceed 40°C (104°F). For example, inside
sheds, vehicles, or metal buildings in the summer.
■ Check damaged parts. Before further use of this
flashlight, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Do not use flashlight if it
does not function properly.
■ Have your flashlight repaired by a qualified person.
This tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by
qualified person using original spare parts, otherwise
this may result in considerable danger to the user.
MAINTENANCE
■ When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Do not attempt to modify this tool or create accessories
not recommended for use with this tool.
performing any routine

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOLS
Safety alert
CE conformity
EurAsian Conformity Mark
Ukrainian mark of conformity
Please read the instructions carefully
before starting the machine.
Class III protection
Lamp
Safe distance between the light source
and illuminated surface.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK
1