Description Of The Appliance; Standard Mode - ARIETE Free Style 6236 Mode D'emploi

• Always take off the appliance turning the temperature control knob to "MIN" and disconnect the main plug from
the wall socket before filling the iron with water or pouring the remaining water out.
• Do not expose the appliance to atmospheric agents (rain, sun, etc.).).
• For proper disposal of the product pursuant to the European Directive 2009/96/EC please read the relevant
leaflet enclosed with the product.
• SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Notes: when using the iron for the first time, test it on an old piece of fabric to ensure that the sole plate and water tank are
completely clean.

DESCRIPTION OF THE APPLIANCE

A - Spray nozzle
B - Water tank filling cover
C - Steam adjustment selector
D - Steam button
E - Spray button
F - Power cord protection
G Power supply connection
H - Iron temperature control lamp
I - Reference for temperature setting
J - Temperature adjustment knob
K - SELF CLEAN button
L - Tank
M - Soleplate
N - Three-position selector for power supply connection lock/unlock
O - Iron stand
P - Water measure
INSTRUCTIONS FOR USE
Warning!
Remove any labels and protections from the soleplate before using the appliance for the first time.
This iron offers the 2 in 1 function.
The 2 in 1 function offers a powerful cordless iron (Cordless mode), which can be easily converted into a cable iron (Stand-
ard mode).

Standard mode

Move the lock/unlock selector (N) in the down position (
the appliance as a traditional iron.
Cordless mode
Move the lock/unlock selector (N) to the up position (
the freedom of movement in cordless mode without changing your ironing pattern: the iron charges alone on the rest while
you reorder the garments.
When the iron does not dispense no more steam, just put it on the base and wait that the light (H) turns off to return ironing
in cordless mode.
Filling the tank before use
Warning!
Make sure the iron is unplugged from the supply mains before filling the tank with water.
Move the lock/unlock selector of the cordless power connection (N) in the position (
power connection) from the iron rest.
Move the steam adjusting knob (C) onto "0". Open the cover (B) pulling it upwards. Hold the iron horizontally and fill the tank
with tap water up to the maximum level using the measuring cup (P) provided (Fig. 5). Close the cover (A) again. If your tap
water is very hard, use demineralized water.
NEVER exceed the MAX mark when filling the tank.
) (Fig. 8). Lift the iron from the iron rest. In this way you use
) (Fig. 3). Lift the iron from the iron rest to start ironing. Discover
), upwards. Lift the iron (without the
11