Data Types - B+K precision BK 878B Manuel D'utilisation

the result will be in the following format:
<Result> + <CR> <LF>
For example, in auto fetching mode, the meter will send
the measured data automatically when the Type de cycle
is completed. The format of the printed data will be
shown as the following:
<Primary measured data, Secondly measured data,
Tolerance Result > + <CR> <LF>

Data Types

Returned message is an ASCII string from the meter
responding to a query.
accompanied a "?" mark. Table 4 below explains the
different data types.
Table 4 - Data Type of Responded Messages
Data Type
<NR1>
<NR2>
<NR3>
Explanation
An integer
This
representation has
an explicit
point
This representation +2.345678E+04
A query is a command
+800,-200,100,-50
numeric
+1.56,-0.001,10.5
radix
74
Example