System Startup; System Software - XMG A506 MZS Advanced Guide Utilisateur Concis

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use
with the computer (e.g. keyboard and mouse) to
their ports.
4. Attach the AC/DC adapter to the DC-In jack on the
rear of the computer, then plug the AC power cord
into an outlet, and connect the AC power cord to
the AC/DC adapter (make sure you use the
adapter when first setting up the computer, as
to safeguard the computer during shipping the
battery will be locked to not power the system until
first connected to the AC/DC adapter).
5. Use one hand to raise the lid/LCD to a comfortable
viewing angle (do not to exceed 135 degrees); use
the other hand (as illustrated in
support the base of the computer (Note: Never lift
the computer by the lid/LCD).
6. Press the power button to turn the computer "on".

System Software

Your computer may already come with system
software pre-installed. Where this is not the
case, or where you are re-configuring your
computer for a different system, you will find
this manual refers to Microsoft Windows 10.
4
Figure 1) to
135
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
Note that you should always shut
your computer down by choosing
the Shut down command in Win-
dows (see below). This will help
prevent hard disk or system prob-
lems.
1. Click the Start
2. Click the
3. Choose Shut
°
Figure 1

Shut Down
Menu icon
.
Power item
.
Down from
the menu.