Anti-Corrosion Protection; Replacing The Power Cable; Replacing The Combined Controller/Limiter - Stiebel Eltron PSH 30 Trend Utilisation Et Installation

INSTALLATION
Maintenance

14.5 Anti-corrosion protection

Ensure that while carrying out maintenance work the anti-corro-
sion protection (560 Ω) is not damaged or removed. Reinsert the
anti-corrosion protection correctly after replacement.

14.6 Replacing the power cable

DANGER Electrocution
The power cable must only be replaced (for example
if damaged) with the original spare part by a qualified
contractor authorised by the manufacturer.

14.7 Replacing the combined controller/limiter

1
1 Controller sensor
2 Limiter sensor
f Insert the controller sensor and the limiter sensor into the f
sensor well as far as they will go.
22 | PSH Trend
2
www.stiebel-eltron.com