Orbit 62001 Mode D'emploi Et D'installation page 12

6. Attach a garden hose to the outlet threads.
7. Turn the faucet on slowly to check for leaks. Tighten hose fittings if there
are any leaks.
8. The Orbit timer can be programmed while attached to the valve or removed
from the valve for more convenience. See page 12 or use the Quick
Reference on the panel cover for programming instructions.
9. After programming, replace the timer by sliding it onto the valve and
securing it in place.
10. To test the valve and timer, follow steps 1-4 for Manual Operating on
page 17.
11. Close the panel cover to the timer. Your timer will automatically turn the
water on and off according to the programmed
schedule.
11